Trimble X9 Core LT support: FieldLink now works with the new X9 Core LT. Scan settings adjust automatically based on your instrument’s license.
Unitless model improvement: DXF and DWG files without units now import correctly as US Feet if your project uses US Feet.
Unit assumption warning: FieldLink shows a warning if imported CSV or TXT files don’t have units.
Localized audio: Added translated audio for events like “No target,” “Observation stored,” “Stake point,” and “Target locked.”
Status Sharing: This feature has been permanently removed.
AprilTag fixes: Corrected scan placement and collection issues when AprilTags weren’t vertical or Enhanced Tracking wasn’t active.
Traverse & staking crashes: Fixed crashes during traverse calculations and staking points (GNSS only).
X7 WiFi hang: Solved the endless spinning icon when changing X7 WiFi Band settings.
Vision & Bluetooth issues: Vision icon now disables correctly, and AprilTag collection no longer stays active after connecting via Bluetooth.
Instruments: X7, X9 (Classic, Core, Core LT, Premium), RTS573/655/673/771/773/873, Ri, SPS Series, R780/R780-2 Dual-band, DA2, RPT600 (see compatibility notes below).
Firmware: Each instrument has a specific firmware version required; install via Trimble Installation Manager or through your service provider. Connect via USB for best results.
Controllers:
T100, T10X, T10X (2024), T110, DTR301Y 10.1” Tablet
FieldLink 2025.4.0 supports X7, X9, RTS, Ri, SPS986, R780, R780-2, DA2.
Note: RPT600 is not supported on T110.
Windows OS:
Windows 11 (tested with T100, PC, T10X, T110)
Windows 10 (tested with PC, T10, T10X, T100, DTR301Y)
Coordinate System Manager:
Version: 4.0.1.0
Database version: 112